On order over $50 USD
Sign up new an account
Mon- Fri: 9AM - 6PM PST
Eleaf iStick Pico 25 ingeniously packs a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter. With a compact size, you can hold it in the palm, much more convenient for usage and portability.
E-liquid capacity: 2ml
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery
(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW mode)
1 × iStick Pico 25 (without battery)
1 × QC USB Cable
2 × User Manuals
With a compact size, the iStick Pico 25 is very comfortable to hold and carry. Powered by single 18650 battery, it is capable of outputting a maximum power of 85W.
The iStick Pico 25 features a big 0.91-inch screen that offers concise and clear interfaces. And there are three switchable interfaces for you to choose the one you’re most accustomed to.
The iStick Pico 25 can handle various tanks up to 25mm diameter.
With a maximum charging current of 2A, the battery in the iStick Pico 25 can be fully charged much more quickly.
The iStick Pico 25 is powered by a single 18650 battery, allowing to always carry spare batteries with you.
Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest.
The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging.
Charging: the 18650 battery can be charged in the iStick Pico 25 through the side USB port via wall adapter or computer or charged with an external battery charger.
The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.
Download the file below to put custom logo into your iStick Pico 25.